Perle home Perle home Perle home
  • Global - English

    Deutsch

    Français

    Italiano

    Español

  • Contact Us
  • PRODUCTS
  • APPLICATIONS
  • HOW TO BUY
  • SUPPORT
  • ABOUT PERLE
  1. Products
  2. Industrial Ethernet Switches
  3. Unmanaged
  4. Download PDF

IDS-108HP PoE (90W) Switches

8-port Unmanaged Gigabit Switches

IDS-108HP PoE (90W) Switches image-lg

IDS-108HP Industrial Gigabit PoE Switch

IDS-108HP Industrial Gigabit PoE Switch image-xlg
  • 8 x 10/100/1000 RJ45 Ethernet Ports
  • 8 PoE ports supply up to 90 Watts PSE power, IEEE 802.3bt compliant
  • QoS (Quality of Service) prioritized messages
  • Ruggedized design for harsh environments
  • Remotely detect and reboot unresponsive equipment
Get a quote
  • Overview
  • Hardware Specs
  • Application Diagrams
  • Documentation
  • Ordering Details

Perle IDS-108HP PoE Switches are designed for easy deployment in challenging industrial environments where extensive temperature tolerance, resistance to vibrations and shocks, and compliance with stringent safety standards are required. This low-cost, easy-to-use device combines essential industrial Ethernet networking functionality, real-time deterministic network operation, and advanced rugged performance. While it requires no configuration and will operate instantly as soon as you power it up, the built-in QoS (Quality of Service) support for EtherNet/IP and PROFINET allows for traffic prioritization and effective management of resources.

This versatile switch features full/half-duplex auto-negotiation and auto MDI/MDIX operation, allowing for convenient connection of various network devices. In addition, these PoE Switches are classified as Power Sourcing Equipment (PSE). While using standard UTP cables that carry Ethernet data, the IDS-110HP has eight ports that provide up to 90 watts of power to Powered Devices (PDs) such as outdoor PTZ dome cameras, wireless access points, and way-side communication devices. Learn more about PoE.

A built-in watchdog feature enables the IDS-108HP switch to operate as an intelligent device to prevent packet loss from powered devices (PDs) in the network. If a PD becomes unresponsive, the IDS-108HP will reboot the device without interrupting other PDs connected to the switch.

The IDS-108HP also provides a relay output contact that triggers an immediate alarm when redundant power fails.

Each component within these industrial-grade switches is specialized with overbuilt hardware and chips, ensuring their suitability for outdoor deployment. Their unwavering strength and resilience enable them to provide robust networking solutions, catering to the need for Fast Ethernet and Gigabit networks. They provide the necessary reliability and durability for industrial settings where dependability and high-speed connectivity are crucial. Don’t trust your critical communications to commercial switch products. Perle Industrial Ethernet switches give you the proven assurance that your system will keep running for years.

High reliability rugged design
for harsh environments
  • Operates in -40 to 75°C
  • Compact corrosion-resistant IP30 or IP40 metal case will fit environments with limited space.
  • UL 61010 (formerly UL508) Industrial Control Equipment Safety certified
  • Industrial Fanless Design - no moving parts
  • Dual power input. Connect to separate power sources for redundancy.
    • Reverse polarity protection
    • Overload current protection
  • Certified to handle surges, vibration, and shock conditions
  • 6Kv surge protection
  • NEMA TS2 approved for Traffic Control Applications
  • EN 50121-4 certified for railway deployments
Real-time Ethernet performance
  • QoS (Quality of Service) prioritized messages for PROFINET and EtherNet/IP
    • tag packets, prioritize applications, and reserve bandwidth for critical tasks
  • Fast wire speed, store and forward switching, non-blocking architecture
  • Auto-sensing for speed and duplex
  • Auto-mdi/mdix-crossover works with straight and crossover cables
  • IEEE 802.3x flow control
PoE
  • Up to 90 Watts per port driving up to eight class 8 (IEEE 802.3bt Type 4) PDs
  • Total power budget up to 270W
  • PoE Watchdog - data streaming monitoring for connected PD
Energy Efficient Ethernet (EEE) As per 802.3az, this provides power savings during idle network activity.

Hardware & Technical Specifications: IDS-108HP Industrial Gigabit Switches

Interfaces
RJ45

8 x 10/100/1000BASE-TX PoE up to 100 meters (328 ft)

Auto-negotiation

Auto-MDI/MDIX-crossover for use with either crossover over straight-through cable types

Ethernet isolation 1500 V

Alarm Contact One relay output with current 0.5A @ 48V at Normal Open or Normal Close
DIP Switches
IDS-100-HP Top

IDS-100-HP Top

IDS-100-HP Top
Power
Dual Power Input 46-57VDC (Terminal Block 8 pins)
Power Consumption 9.72W (without PoE)
Maximum Current Consumption @ 24VDC 0.20A @ 48VDC (without PoE)
Power Connector 8-Pin Removable Terminal Block
Overload Current Protection 10A fuse provides overload current protection
Reverse Polarity Protection The positive and negative inputs can be reversed providing safe and simple power connectivity.
PoE Power Output

Up to 90W/port
Power Budget: 270W

46-57VDC for IEEE 802.3af type 1, ≤15.4W PD devices.

52-57VDC for IEEE 802.3at/bt type 2/3, 30W, 60W PD devices.

54-57VDC for IEEE 802.3bt, type 4, 90W PD devices

Switch Properties
Standards

IEEE 802.3af/at/bt Power over Ethernet

IEEE 802.3 10BASE-T

IEEE 802.3u 100BASE-TX/FX

IEEE 802.3az Energy Efficient Ethernet

IEEE 802.1p Quality of Service (QoS)

IEEE 802.3ab 1000BASE-T

Processing Type

Store-and-Forward

Auto Negotiation

Half-duplex back-pressure and IEEE

Auto MDI/MDIX

MAC Address Table Size 4K MAC
Packet Buffer Memory 1.5 Mbit
Jumbo Frame Size 9216 bytes
Forward/Filtering Rate

14,880pps for 10Mbps

148,810pps for 100Mbps

1,488,100pps for 1000Mbps

Indicators
Power LED 1 This LED is green when power is applied
Power LED 2 This LED is green when power is applied
Fault LED This LED is red when a fault is detected
RJ45 / SFP Ethernet LED These LED is solid green for established link and bllinks green when activity is detected (per port)
Environmental Specifications
Operating Temperature Ranges

IDS-108HP: -10 to 60°C (14 to 140°F)

IDS-108HP-XT: -40 to 75°C (-40 to 167°F)

Storage Temperature Range -40 to 85°C (-40 to 185°F)
Operating Humidity Range 5% to 90% non-condensing
Storage Humidity Range 5% to 95% non-condensing
Operating Altitude Up to 3,048 meters (10,000 feet)
Chassis Metal with an IP30 or IP40 (for XT) ingress protection rating
Din Rail Mountable DIN Rail attachment included. Mounts to standard 35 mm DIN rail in accordance with DIN EN 60175.
IDS-100-HP Back

IDS-100-HP Back

IDS-100-HP Back
Maximum Heat Output 33.17 BTU/Hr (without PoE)
MTBF 4754397 hours,
MTBF Calculation model based on MIL-HDBK-217-FN2 @ 25°C
Product Weight and Dimensions
Weight 556g / 1.23lbs
Dimensions 45 x 125 x 145 mm / 1.77” x 4.92” x 5.71” (W x D x H)
Packaging
Shipping Weight 737g / 1.62lbs
Shipping Dimensions 235 x 185 x 65 mm / 9.25" x 7.28" x 2.56" (W x D x H)
Contents Shipped

Industrial Ethernet Switch with DIN Rail attachment

Terminal block

QR Code for online manuals

Standards and Certifications
Safety UL 61010
EMC Emissions

FCC Part 15 Class A

VCCI Class A

EN 61000-6-4

ICES-003

EN 55032

EMC Immunity

EN 61000-6-2

EN 61000-4-2 (ESD)

EEN 61000-4-3 (Radiated RFI)

EN 61000-4-4 (Burst)

EN 61000-4-5 (Surge)

EN 61000-4-6 (Induced RFI)

EN 61000-4-8 (Magnetic field)

Industrial EN 50121-4
Environmental Test Compliance

IEC 60068-2-6 Fc (Vibration)

IEC 60068-2-27 Ea (Shock)

Environmental Reach, RoHS and WEEE Compliant
Other

ECCN: 5A991

HTSUS Number: 8517.62.0020

5 year warranty

IDS-108HP Industrial Switch Power over Ethernet (PoE) Diagram
IDS-108HP Industrial Switch Power over Ethernet ( PoE )Diagram
Daisy Chain Application

IDS-108HP Switches can connect to neighboring switches via uplink ports. Each IDS-108HP provides connectivity to the fiber link and power IP cameras and Wi-Fi access points at each location along the daisy chain.

IDS-108HP Industrial Switch connectivity to the fiber link and power IP cameras diagram
IDS-108HP PoE (90W) Switches - Mechanical Drawing
IDS-108HP PoE (90W) Switches - Mechanical Diagram
Top
  • Site Map
  • Terms & Conditions
  • Privacy & Cookie Policy
  • Cookie Settings

Products by Perle

specialix   Chase Research
© 1996 - Perle. All Rights Reserved.
×

Send us an Email

Have a Question?

We can provide more information about our products or arrange for a price quotation.


email-iconSend an Email
contactus-iconSend an Email callus-iconCall Us