IDS-105FE Industrial Ethernet Switch

5-port Compact DIN Rail Switch

5 x RJ45 ports with 10/100 Mbps on all ports
Redundant dual power input 12/24/48 VDC
Reverse polarity protection
Fan-less design with no moving parts
-10 to 60C industrial operating temperature support
QoS (Quality of Service) prioritized messages

The Perle IDS-105FE Industrial Ethernet Switch is designed for easy deployment in industrial environments with harsh operating conditions and limited space. Designed to stand up to extreme temperatures, surges, vibrations, and shocks found in industrial automation, infrastructure, transportation, security, oil and gas, and mining the IDS-105FE Switch is an economical easy-to-use device, that provide essential industrial Ethernet networking functionality.

This unmanaged switches support 9 to 55VDC redundant power input and provide a relay alarm for power failure. The full/half-duplex auto-negotiation and auto MDI/MDIX operation simplifies installation and setup for convenient connection of a variety of network devices. And, QoS support allows for traffic prioritization and effective management of resources.

For automation and industrial control systems using EtherNet/IP, this rugged, DIN rail mountable switches with metal housing provides security and easy installation (mounting kit is included).

IDS-105FE Industrial Ethernet Switch Features

Rugged design for harsh environments	Corrosion resistant IP40 metal case UL61010 Industrial Control Equipment Safety certified Handles vibration and shock conditions found in industrial environments
Reliable operation	Fanless, no moving parts Dual power input. Connect to separate power sources for redundancy. Reverse polarity protection Overload current protection
Real-time Ethernet performance	Fast wire-speed, store and forward switching, non-blocking architecture Auto-sensing for speed and duplex Auto-mdi/mdix-crossover works with straight and crossover cables
Energy Efficient Ethernet (EEE)	Energy Efficient Ethernet (EEE) as per 802.3az. This provides power savings during idle network activity.

Hardware & Technical Specifications: IDS-105FE Industrial Ethernet Switch

Interfaces

RJ45

5 x RJ45 ports for 10/100Base-TX up to 100 meters (328 ft)
Auto-negotiation
Auto-MDI/MDIX-crossover for use with either crossover over straight-through cable types
Ethernet isolation 1500 V

Power

Dual Power Input

12/24/48VDC (9-55VDC)

Power Consumption

1.82W Max. 0.14A@12VDC / 0.07A@24VDC, 0.038A@48VDC

Maximum Current Consumption @24 vDC

0.14A@12VDC / 0.07A@24VDC, 0.038A@48VDC

Power Connector

3-Pin Removable Terminal Block

Overload Current Protection

Reset-able fuse provides overload current protection

Reverse polarity protection

The positive and negative inputs can be reversed providing safe and simple power connectivity.

Switch Properties

Standards

IEEE 802.3u 100BASE-TX/FX
IEEE802.3x full-duplex flow control
IEEE 802.3az Energy Efficient Ethernet
IEEE 802.1p Quality of Service (QoS)

Processing Type

Store-and-Forward
Auto Negotiation
Half-duplex back-pressure
802.3x full-duplex flow control
Auto MDI/MDIX

MAC Address Table Size

Packet Buffer Memory

448 Kbps

Jumbo Frame Size

Forward/Filtering Rate

14,880pps for 10Mbps
148,810pps for 100Mbps

Indicators

Power LED

This LED is green when power is applied

RJ45 / SFP Ethernet LED

Link/Activity (Green), Speed (Yellow)

Environmental Specifications

Operating Temperature Ranges

-10 to 60°C (14 to 140°F)

Storage Temperature Range

-40 to 85°C (-40 to 185°F)

Operating Humidity Range

5% to 90% non-condensing

Storage Humidity Range

5% to 95% non-condensing

Operating Altitude

Up to 3,048 meters (10,000 feet)

Chassis

Plastic with an IP30 ingress protection rating

Din Rail Mountable

DIN Rail attachment included. Mounts to standard 35 mm DIN rail in accordance with DIN EN 60175.

Maximum Heat Output

6.22 BTU/Hr (max.)

MTBF

10667627 Hours

Calculation model based on MIL-HDBK-217-FN2 @ 25°C

Product Weight and Dimensions

Weight

0.2Kg / 0.44lbs

Dimensions

26 x 70 x 110mm / 1.02 x 2.76 x 4.33 Inch (W x D x H)

Packaging

Shipping Weight

0.34Kg (0.75lb.)

Shipping Dimensions

30 x 76.3 x 110mm, 1.18 x 3.05 x 4.4 Inch (W X D X H)

Contents Shipped

Industrial Ethernet Switch with DIN Rail attachment
Terminal block
Installation guide

Standards and Certifications

Safety

UL 62368

EMC Emissions

FCC Part 15 Class A
VCCI Class A
EN 61000-3-2
EN 61000-3-3
EN 61000-6-4

EMC Immunity

EN 61000-6-2
EN 61000-4-2 (ESD)
EEN 61000-4-3 (Radiated RFI)
EN 61000-4-4 (Burst)
EN 61000-4-5 (Surge: ±4kV line-to-ground)
EN 61000-4-6 (Induced RFI)
EN 61000-4-8 (Magnetic field)

Industrial

IEC 60068-2-6 Fc (Vibration)

IEC 60068-2-27 Ea (Shock)

Environmental

Reach, RoHS and WEEE Compliant

Other

ECCN: 5A991
HTSUS Number: 8517.62.0020
5 year Warranty

Mechanical drawings of IDS-105FE Industrial Gigabit Switches

IDS-105FE Industrial Copper Switch Diagram

Installation Guides

EU Declaration of Conformity

Industrial Switch FAQ Knowledgebase

Enabling QoS (Quality of Service) in Perle IDS-100 Unmanaged Industrial Ethernet Switches

Technician typing on a laptop above which float blue, magenta and yellow lines that intersect to generate a data visualization

Built-in QoS support to prioritize EtherNet/IP and PROFINET traffic enables Perle IDS-100 industrial switches to manage network resources effectively.

STELCO use Perle PoE Switches in new surveillance camera system

Diagram for PoE switches in security camera installations

Stelco chose Perle IDS switches to offer connectivity and power for security cameras. The switches work well because they are fan-less and provide high temp support for NEMA enclosures.

Engie Solutions use Perle PoE Switches to Remotely Reboot attached Surveillance Cameras

Diagram for PoE Switches in Engie Security Camera Application

When surveillance cameras freeze or malfunction, Engie Solutions employs the Perle PoE Switch IDS-710HP-XT with IEEE802.3bt support to remotely reset the cameras.

The city of Charlotteville use Perle Industrial Switches to provide reliable connectivity in traffic light control system

Diagram for Optimizing Traffic Flow in the City of Charlotteville

Perle Industrial Switches provide reliable connectivity in traffic light control system and optimizing Traffic Flow in the City of Charlotteville. With support for gigabit speeds, and -40 F to 167░ F operating temperatures, the switches are reliable in extended temperature environments

The Scientific Workgroup for Rocketry and Spaceflight (WARR, Wissenschaftliche Arbeitsgemeinschaft fⁿr Raketentechnik und Raumfahrt) use an IOLAN Device Server to facilitate RS485 data transmission and conversion between onboard rocket flight computers and the ethernet ground infrastructure and monitoring software. Ethernet Extenders to solve the problem of transmitting data over 1000m between a control room and rocket launch pad. An Industrial PoE Switch supplies 30 watts of power to several IP cameras on a rocket launch pad and transmits important insights to the team of rocket scientists sitting in the ground control station.

WARR rocketry team is using a Perle Industrial PoE Switch, a pair of long-range Perle Ethernet Extenders, and a Perle extended temperature Serial Device Server Project Nixus in Rocket-Science Challenge.

German Research Center for Artificial Intelligence (DFKI, Deutsches Forschungszentrum fⁿr Kⁿnstliche Intelligenz) use Perle IRG Routers and IDS Switches for data transmission to create virtual reality (VR) environments

Take a closer look at the IRG Router and IDS Switch integrated into Valdemar

Valdemar runs on batteries, while the base station is solar or wind-powered. The Perle IRG Router's low power consumption and no SIM card recognition issues made it the best choice.

NBC Universal use Perle Industrial Switch and Media Converter to enable device control of Ethernet enabled satellite amplifiers greater than 300ft from a switch

NBC Universal Ethernet Extender Network Diagram

NBCUniversal use Perle Industrial Switch and Media Converter to gain device control of Ethernet enabled satellite amplifiers greater than 300ft from a switch. The setup is an inexpensive way to expand the network.

Deutsche Windtechnik replace unreliable commercial grade equipment with Perle Industrial Ethernet Switches and Device Servers to ensure reliable fault notification

Deutsche Windtechnik replace unreliable commercial grade Switches and Serial to Ethernet Servers with Industrial Grade products from Perle

CBK Engineering use Perle I/O Device Servers & Ethernet Switches to Develop Plug & Play Remote Alarm Multiplexers

Network diagram with digital inputs and outputs

In case of a power outage, UPS kicks-in providing back-up power to the Rockefeller Center, Two World Financial Center and the Pepsi Building

Central Bank of Nigeria use Perle Industrial Switches in CCTV Security Upgrade

Perle PoE Industrial Switches provided a reliable security solution to the Central Bank of Nigeria, with every component designed and tested to operate in extended temperature ranges. The switches are compliant to IEEE 802.3af/at and provide up to 30 watts of power to PDs.

Lulworth Estate use Perle Industrial Switches to network smart parking meters

Lulworth Estate installed Perle Industrial Switches in the smart parking meters and connected via 10/100 fiber to the Estate central office. The IT Network Administrator is now able to monitor and manage the status of the parking meters remotely.

Navtech use Perle Industrial Switches & Media Converters in military airbourne surveillance system

Navtech Systems supplies airborne surveillance video downlinks globally, and secure, real-time transmission and distribution of data is crucial. Perle units are used in the network on the ground to access the imagery and data received from the aircraft. Perle products are high-quality, solid, secure, and reliable.

City of Colorado Springs use Perle Industrial Switches & Power Supplies in new surveillance installation

City of Colorado Springs Network Diagram

Great security cameras provide high-resolution video for catching criminals. Colorado Springs uses Perle PoE media converters and switches to help install high-quality IP cameras, even far from power sources.

Elsag® Fixed Plate Hunter ALPR System cameras powered by Perle PoE Switches

Diagram showing ALPR cameras powered by PoE Switches

Leonardo used Perle's IDS-105GPP switches for their Automatic License Plate Recognition (ALPR) systems. These rugged, fan-less switches provide reliable performance in extreme temperatures of -40░C to 75░C. ALPR systems use cameras mounted on highways, bridges, and tunnels to capture vehicle speed and license plates.