IDS-104FE Industrial Ethernet Switches
5-port Compact DIN Rail Switches

- 4 x RJ45 ports with 10/100 Mbps on all ports
- 1 x SC or ST port for 100Base-FX
- Redundant dual power input 12/24/48 VDC
- Reverse polarity protection
- Fan-less design with no moving parts
- -10 to 60C industrial operating temperature support
- QoS (Quality of Service) prioritized messages
With a combination of four Fast Ethernet copper ports, and one Fast Ethernet fiber port for long distance connectivity, Perle IDS-104FE Industrial Ethernet Switches are designed for easy deployment in industrial environments with harsh operating conditions and limited space. Designed to stand up to extreme temperatures, surges, vibrations, and shocks found in industrial automation, infrastructure, transportation, security, oil and gas, and mining the IDS-104FE Switches are economical easy-to-use devices, that provide essential industrial Ethernet networking functionality.
These unmanaged switches support 9 to 55VDC redundant power input and provide a relay alarm for power failure. The full/half-duplex auto-negotiation and auto MDI/MDIX operation simplifies installation and setup for convenient connection of a variety of network devices. And, QoS support allows for traffic prioritization and effective management of resources.
For automation and industrial control systems using EtherNet/IP, these rugged, DIN rail mountable switches with metal housing provides security and easy installation (mounting kit is included).
Hardware & Technical Specifications: IDS-104FE Industrial Ethernet Switches
Interfaces | |
---|---|
RJ45 |
4 x RJ45 ports for 10/100Base-TX up to 100 meters (328 ft) Auto-negotiation Auto-MDI/MDIX-crossover for use with either crossover over straight-through cable types Ethernet isolation 1500 V |
100FX Fiber |
IDS-104FE-M2SC2: 1 x Multi Mode (SC) - 2Km IDS-104FE-M2ST2: 1 x Multi Mode (ST) - 2Km IDS-104FE-S2SC20: 1 x Single Mode (SC) - 20Km IDS-104FE-S2ST20: 1 x Single Mode (ST) - 20Km |
Power | |
Power Input | 12/24/48VDC (9-55VDC) |
Power Consumption | 1.82W Max. 0.14A@12VDC / 0.07A@24VDC, 0.038A@48VDC |
Maximum Current Consumption @ 24VDC | 0.14A@12VDC / 0.07A@24VDC, 0.038A@48VDC |
Power Connector | 3-Pin Removable Terminal Block |
Overload Current Protection | Reset-able fuse provides overload current protection |
Reverse Polarity Protection | The positive and negative inputs can be reversed providing safe and simple power connectivity. |
Switch Properties | |
Standards |
IEEE 802.3u 100BASE-TX/FX IEEE802.3x full-duplex flow control IEEE 802.3az Energy Efficient Ethernet IEEE 802.1p Quality of Service (QoS) |
Processing Type |
Store-and-Forward Auto Negotiation Half-duplex back-pressure 802.3x full-duplex flow control Auto MDI/MDIX |
MAC Address Table Size | 1K |
Packet Buffer Memory | 448 Kbps |
Jumbo Frame Size | No |
Forward/Filtering Rate | 14,880pps for 10Mbps 148,810pps for 100Mbps |
Indicators | |
Power LED | This LED is green when power is applied |
RJ45 / SFP Ethernet LED | Link/Activity (Green), Speed (Yellow) |
Environmental Specifications | |
Operating Temperature Ranges | -10 to 60°C (14 to 140°F) |
Storage Temperature Range | -40 to 85°C (-40 to 185°F) |
Operating Humidity Range | 5% to 90% non-condensing |
Storage Humidity Range | 5% to 95% non-condensing |
Operating Altitude | Up to 3,048 meters (10,000 feet) |
Chassis | Plastic with an IP30 ingress protection rating |
Din Rail Mountable | DIN Rail attachment included. Mounts to standard 35 mm DIN rail in accordance with DIN EN 60175. |
Maximum Heat Output | 6.22 BTU/Hr (max.) |
MTBF | 710611 hours MTBF Calculation model based on MIL-HDBK-217-FN2 @ 25°C |
Product Weight and Dimensions | |
Weight | 0.2Kg / 0.44lbs |
Dimensions | 26 x 70 x 110mm / 1.02" x 2.76" x 4.33" (W x D x H) |
Packaging | |
Shipping Weight | 0.34Kg (0.75lb.) |
Shipping Dimensions | 30 x 76.3 x 110mm, 1.18" x 3.05" x 4.4" (W x D x H) |
Contents Shipped | Industrial Ethernet Switch with DIN Rail attachment Terminal block Installation guide |
Standards and Certifications | |
Safety | UL 62368 |
EMC Emissions | FCC Part 15 Class A VCCI Class A EN 61000-3-2 EN 61000-3-3 EN 61000-6-4 |
EMC Immunity | EN 61000-6-2 EN 61000-4-2 (ESD) EEN 61000-4-3 (Radiated RFI) EN 61000-4-4 (Burst) EN 61000-4-5 (Surge: ±4kV line-to-ground) EN 61000-4-6 (Induced RFI) EN 61000-4-8 (Magnetic field) |
Industrial | IEC 60068-2-6 Fc (Vibration) IEC 60068-2-27 Ea (Shock) |
Laser Safety | EN 60825-1 Fiber optic transmitters on this device meet Class 1 Laser safety requirements per IEC-60825 FDA/CDRH standards and comply with 21CFR1040.10 and 21CFR1040.11. |
Environmental | Reach, RoHS and WEEE Compliant |
Other | ECCN: 5A991 HTSUS Number: 8517.62.0020 5 year warranty |
Fiber Specifications | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Fiber1 Type | Transmit (dBm) | Receive (dBm) | Power Budget (dB) | Wavelength (nm) | IEEE | Core Size (um) | Modal Bandwidth (MHz Km) | Max Operating Distance (Km / mi) | |||
Min | Max | Min | Max | ||||||||
IDS-104FE-M2SC2 | MMF (Duplex SC) | -23.5 | -14 | -31 | 0 | 7.5 | 1310 | 100Base-FX | 50 | 200 | 2km |
-20 | -14 | 11 | 62.5 | ||||||||
IDS-104FE-M2ST2 | MMF (Duplex ST) | -23.5 | -14 | -32 | -8 | 8.5 | 1310 | 100Base-FX | 50 | 200 | 2km |
-20 | -14 | 12 | 62.5 | ||||||||
IDS-104FE-S2SC20 | SMF (Duplex SC) | -20 | 0 | -32 | 0 | 12 | 1310 | 100Base-FX | 9/125/um | 200 | 20km |
IDS-104FE-S2ST20 | SMF (Duplex ST) | -15 | -8 | -32 | -3 | 17 | 1310 | 100Base-FX | 9/125/um | 200 | 20km |
IDS-104FE Industrial Ethernet Switches |
---|
![]() |