IDS-106GE Industrial Gigabit Switches
8-port Compact DIN Rail Switches
IDS-106GE Industrial Gigabit Switch
- 6 x RJ45 ports with 10/100/1000 Mbps on all ports
- 2 x SFP slots for 100/1000Base-X SFP modules supplied by Perle, Cisco, or other MSA compliant manufacturers
- Redundant dual power input 12/24/48 VDC
- Reverse polarity protection
- Fan-less design with no moving parts
- -40 to 75C industrial operating temperature support
- QoS (Quality of Service) prioritized messages
With a combination of six Gigabit copper ports, and two SFP fiber ports for long distance connectivity, Perle IDS-106GE Industrial Gigabit Ethernet Switches are designed for easy deployment in industrial environments with harsh operating conditions and limited space. Designed to stand up to extreme temperatures, surges, vibrations, and shocks found in industrial automation, infrastructure, transportation, security, oil and gas, and mining the IDS-106GE Switches are economical easy-to-use devices, that provide essential industrial Ethernet networking functionality.
These unmanaged switches support 9 to 55VDC redundant power input and provide a relay alarm for power failure. The full/half-duplex auto-negotiation and auto MDI/MDIX operation simplifies installation and setup for convenient connection of a variety of network devices. And, QoS support allows for traffic prioritization and effective management of resources.
For automation and industrial control systems using EtherNet/IP or PROFINET, these rugged, DIN rail mountable switches with metal housing provides security and easy installation (mounting kit is included).
Hardware & Technical Specifications: IDS-106GE Industrial Gigabit Switches
| Interfaces | |
|---|---|
| RJ45 |
6 x RJ45 ports for 10/100/1000Base-TX up to 100 meters (328 ft) Auto-negotiation Auto-MDI/MDIX-crossover for use with either crossover over straight-through cable types Ethernet isolation 1500 V |
| Small Form Factor Pluggable (SFP) slot(s) | 2 empty SFP slot models for 100/1000Base-X SFP modules supplied by Perle, Cisco or other manufacturers of MSA compliant SFPs |
| Alarm Contact | One relay output with current 0.5A@30V |
| Power | |
| Dual Power Input | 12/24/48VDC (9-55VDC) |
| Power Consumption | 5.55W max |
| Maximum Current Consumption @ 24VDC | 0.20A @ 24VDC |
| Power Connector | 7-Pin Removable Terminal Block |
| Overload Current Protection | 2A fuse provides overload current protection |
| Reverse Polarity Protection | The positive and negative inputs can be reversed providing safe and simple power connectivity. |
| Switch Properties | |
| Standards |
IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX/FX IEEE 802.3az Energy Efficient Ethernet IEEE 802.1p Quality of Service (QoS) |
| Processing Type |
Store-and-Forward Auto Negotiation Half-duplex back-pressure and IEEE 802.3x full-duplex flow control Auto MDI/MDIX |
| MAC Address Table Size | 4K |
| Packet Buffer Memory | 1.5 Mbit |
| Jumbo Frame Size | 9216 bytes |
| Forward/Filtering Rate | 14,880pps for 10Mbps 148,810pps for 100Mbps 1,488,100pps for 1000Mbps |
| Indicators | |
| Power LED 1 | This LED is green when power is applied |
| Power LED 2 | This LED is green when power is applied |
| Fault LED | This LED is red when a fault is detected |
| RJ45 / SFP Ethernet LED | These LED is solid green for established link and bllinks green when activity is detected (per port) |
| Environmental Specifications | |
| Operating Temperature Ranges | IDS-106GE-2SFP: -10 to 60°C (14 to 140°F) IDS-106GE-2SFP-XT: -40 to 75°C (-40 to 167°F) |
| Storage Temperature Range | -40 to 85°C (-40 to 185°F) |
| Operating Humidity Range | 5% to 90% non-condensing |
| Storage Humidity Range | 5% to 95% non-condensing |
| Operating Altitude | Up to 3,048 meters (10,000 feet) |
| Chassis | Metal with an IP40 ingress protection rating |
| Din Rail Mountable | DIN Rail attachment included. Mounts to standard 35 mm DIN rail in accordance with DIN EN 60175. |
| Maximum Heat Output | 18.926 BTU/Hr |
| MTBF | 2160910 hours MTBF Calculation model based on MIL-HDBK-217-FN2 @ 25°C |
| Product Weight and Dimensions | |
| Weight | 0.336 Kg, 0.74 lbs |
| Dimensions | 45x75x100mm (W x D x H) (1.77"x2.95"x3.94") |
| Packaging | |
| Shipping Weight | 336g (0.74lbs) |
| Shipping Dimensions | 45x75x100mm, 1.77"x2.95"x3.94" (W x D x H) |
| Contents Shipped | Industrial Ethernet Switch with DIN Rail attachment Terminal block Installation guide |
| Standards and Certifications | |
| Safety | UL 61010 |
| EMC Emissions | FCC Part 15 Class A VCCI Class A EN 61000-6-4 ICES-003 EN 55032 |
| EMC Immunity | EN 61000-6-2 EN 61000-4-2 (ESD) EEN 61000-4-3 (Radiated RFI) EN 61000-4-4 (Burst) EN 61000-4-5 (Surge) EN 61000-4-6 (Induced RFI) EN 61000-4-8 (Magnetic field) |
| Industrial | EN 50121-4 |
| Environmental Test Compliance | IEC 60068-2-6 Fc (Vibration) IEC 60068-2-27 Ea (Shock) |
| Environmental | Reach, RoHS and WEEE Compliant |
| Other | ECCN: 5A991 HTSUS Number: 8517.62.0020 5 year warranty |
| IDS-106GE Industrial Gigabit Switches |
|---|
 |